Hard-wearing Protective Sealer

Universeal Outdoor Sealer forms a protective hard wearing layer that closes the pores of the stone. Water and dirt can no longer penetrate into the surface aiding easier cleaning and maintenance. Once dried the water permeability of the stone is reduced significantly. The colours of the stone also become more vibrant through the sheen / wet look finish. The protective film is hardwearing, UV-resistant and does not yellow. [Data Sheet]

Special Features

• High Quality Stain Protection
• Intensifies Natural Colours
• Quick Drying & Easy Application
• Long Lasting Protection

Packaging Options:

• 1 Litre tins with childproof cap (12 per carton)
• 5 Litre tins with childproof cap (4 per carton)

Coverage:

Up to 12-25m2 per litre. Coverage will vary depending on the type of surface application.

Directions for use:

The surface to be treated must be completely dry and clean. Apply Universeal Outdoor Sealer evenly with a clean roller or brush. In the case of highly absorbent surfaces, it may be necessary to apply 2-3 coats to achieve desired effect. Application Temperature: the temperature of the surface should be between 5°C and 25°C. *Drying Time: Light foot traffic after approx 30-45 minutes, completely cured after 48 hours. Where possible avoid spillages and cleaning the surface area for 48hrs after application. Always wipe up any spills immediately within this timing.

Please Note:

Universeal Outdoor Sealer is not suitable for use on non-absorbent, polished or very finely honed surfaces. Please ensure that no moisture can penetrate into the sealed surface, and that moisture can not be transported through the sides or surface from the ground. Moisture inside the stone will cause the sealant to turn white if the sealer has not already fully cured.

Usage Guidelines: